-
Media gallery
2-Wire Programmable Transmitter IS (Output 4 to 20mA + HART Protocol)
- Regular price
- $189.00
- Regular price
-
- Sale price
- $189.00
- Unit price
- per
- Input: RTD (platinum, copper, nickel), thermocouple
- High measurement accuracy
- 2, 3, 4-wire connection
- 4 to 20mA output, HART Protocol
- Range programmable
- Offset and linearity re-calibration
- Surge & full pulse protection
- Input and output electrical isolated (1500V AC)
- Display unit with powerful programming functions optional
Package: 5 pieces
Shipping: 2-3 weeks
Couldn't load pickup availability
Have a question?
Notified by email when this product becomes available
$189.00
- Description
- Specifications
- Manual and Resources
This transmitter supports RTD and thermocouple inputs, linearizes the input signals and outputs 4mA to 20mA or signals by HART protocol with accuracy ±0.1%FS of selected range. The DIP switch design makes configuration easily done on site as well as range and error programmable by computer software.
The surge and full pulse protection, input and output electrical makes the transmitter work stable and avoid the damage from the thunder or power supply voltage fluctuations from the high-power consumption equipment startups and stops. The low power consumption design decreases the drift from the temperature by the heat dissipation and improves its long-term stability.
The option of probe selections provides the convenience to the user for the whole measurement system. The calibration of transmitter and probe as a system provides the unbroken traceability chain to the data with uncertainty. The annual calibration service can guarantee the long-time use with reliable data.
|
Input Max. offset |
100% |
|
RTD Input |
Pt50, Pt100, Pt200, Pt500, Pt1000 Ni50, Ni100, Ni120, Ni1000 Cu50, Cu100 |
|
Cable resistance per wire |
50Ω per lead |
|
Sensor current |
≤0.3mA |
|
Effect of sensor cable resistance (3-wire) |
<0.001Ω/Ω |
|
Linear resistance |
0Ω to 20000Ω |
|
Thermocouple input |
B, E, J, K, N, R, S, T, C, D |
|
Internal cold end compensation |
Pt1000, -50°C to 105°C |
|
External cold end compensation |
Pt100, -200°C to 850°C |
|
Cable resistance per wire |
10KΩ per lead maximum |
|
Output Current |
4 to 20mA/20mA to 4mA optional |
|
Linear current output |
3.8mA to 20.75mA programmable by Hart protocol |
|
Load (@ current output) |
≤(Vsupply-12)/0.02 Ω |
|
Output load stability |
≤0.01% of span/100 Ω |
|
Output sensor error detection |
Circuit open: ≤3.6mA Circuit short: 20.75mA to 21.6mA configurable |
|
Output updating time |
100ms |
|
Power supply |
12V to 30V DC |
|
Internal power dissipation |
43mW to 0.65W |
|
Response time (programmable) |
0 to 60s |
|
Voltage drop |
12V DC |
|
Warm-up time |
3min |
|
Programming |
Loop power |
|
Accuracy |
0.1%FS selected range |
|
Signal dynamics, input |
24 bit |
|
Signal dynamics, output |
16 bit |
|
Effect of supply voltage change |
<0.002% of span/ VDC |
|
EMC immunity influence |
<±0.5% of span |
|
Operating temperature |
-40°C to 85°C |
|
Operating relative humidity |
<95%rh (non-condenation) |
|
Operating relative humidity |
<95%rh (non-condenation) |
|
Operating relative humidity |
<95%rh (non-condenation) |
|
Protection grade |
IP67/IP00 |
|
Calibration temperature |
22°C to 28°C |
|
Temperature coefficient |
0.008% FS /1℃ |
|
Dimensions/ Weight approx. |
Φ44mm x 24mm/ 46g |
|
Wire size |
≤2.0mm2 stranded wire |
|
Vibration |
2 to 100Hz, 4g |
|
ATEX |
Ex ia IIC T4 NEPSI |